Event: Cyberweek Africa 2026 - National CTF (Finals)
Category: Reverse Engineering
Points: 350
Flag: FLAG{REDACTED} **R3:** 8B303FABB0B6` (retain for Chapter 4)
Summary
The Lost Signal — Chapter 3. A fictional coastal telephone-exchange archive (Kenya, 2002 telecoms era) containing a call register, fragmented switching receipts, a trunk inventory, an operator bulletin, and a small offline replay console (exchange_console.py).
The goal: identify the authentic retained call from the evidence, reconstruct its switching route, and replay it on the stateful console so that COMMIT succeeds. A successful commit reconstructs the sealed relay, prints R3, and releases the Chapter 3 flag.
Everything is local and simulated — no network services, no physical equipment. Python 3.9+ stdlib is sufficient.
Solver script: solve.py (at the challenge root). It parses the CSVs, verifies the TX/RX receipt pairs, builds the phase-aware command sequence, drives the console, and extracts the flag/R3.
Evidence
| File | Purpose |
|---|---|
call_records.csv |
Call register with circuit, service, bearer, origin, destination, campaign and status |
exchange_audit.csv |
TX/RX receipts — unordered, with duplicates and forgeries |
trunk_inventory.csv |
Directed ports, each with one service phase and a bearer class |
operator_bulletin.txt |
Procedure and acceptance rules (CSX/02) |
exchange_console.py |
Stateful simulator; source inspection permitted |
sealed_relay.bin |
Encrypted archive, decrypted on a valid commit |
Input carried over from Chapter 2 (Voices Through the Air): R2 = 60AAA70740D0.
call_records.csv — picking the call
The operator bulletin (CSX/02) states the retained call is:
- type CR-MVT / COAST-RELAY
- campaign LM-08
- status RECOVERABLE
- origin MSA
Only one row matches all four:
| circuit | origin_service | bearer | origin_switch | destination_switch | campaign | status |
|---|---|---|---|---|---|---|
| C-481 | CR-MVT | COAST-RELAY | MSA | LAM | LM-08 | RECOVERABLE |
The others each fail on exactly one point:
| circuit | reason rejected |
|---|---|
| C-482 | test relay (TEST-RELAY, BK-TRN calibration exercise) |
| C-483 | closed (CLOSED), originates at NBO |
| C-489 | earlier campaign LM-07 (unverified) |
exchange_audit.csv — authenticating the route
A genuine switch transfer is recorded twice: a TX entry at the originating exchange and an RX entry at the receiving exchange. Both must agree on circuit, source, destination, trunk port, service phase, receipt code, and bearer. The audit is unordered and contains forged, incomplete, copied, and test-programme entries.
For C-481, three hops pass the TX/RX cross-check:
| Hop | TX/RX | From | To | Port | Phase | Receipt | Bearer |
|---|---|---|---|---|---|---|---|
| 1 | TX + RX | MSA | MLD | M3 | 1 | 4FA9 | COAST-RELAY |
| 2 | TX + RX | MLD | KLF | K2 | 3 | 8D2E | COAST-RELAY |
| 3 | TX + RX | KLF | LAM | L7 | 1 | 1C6B | COAST-RELAY |
The decoys fail for a concrete reason each:
- T8 (MSA→VOI): TX receipt
7C4F(EV-06-TX) vs RX receipt35B8(EV-07-RX) — receipts differ, so the transfer is forged. - M9 (MLD→LAM): a
TEST-RELAYport (EV-08), not part of the coast relay. - E2 (MLD→NBO): TX entry exists (EV-10-TX) but there is no matching RX entry — incomplete.
Resulting authenticated route: MSA → MLD → KLF → LAM via M3 → K2 → L7.
MSA --M3(phase 1)--> MLD --K2(phase 3)--> KLF --L7(phase 1)--> LAM
The T8/P6 detour through VOI and the M9 shortcut are decoys: T8 fails on mismatched receipts, M9 is a TEST-RELAY bearer, E2 has no RX counterpart.
trunk_inventory.csv — service phases
Confirms each directed port’s single available service phase and bearer:
| Port | From | To | Phase | Bearer |
|---|---|---|---|---|
| M3 | MSA | MLD | 1 | COAST-RELAY |
| K2 | MLD | KLF | 3 | COAST-RELAY |
| L7 | KLF | LAM | 1 | COAST-RELAY |
Replaying the clock phases
The console runs a four-phase virtual clock (0–3). HOLD reserves the current exchange; WAIT <1|2> advances the clock while holding (max 2 phases per hold); TRANSFER <port> is accepted only when the console clock equals the trunk’s service phase, and a successful transfer advances the clock one phase and drops HOLD.
| Hop | Clock before | Action | Transfer lands on | Clock after |
|---|---|---|---|---|
| M3 | 0 | HOLD, WAIT 1 |
phase 1 ✓ | 2 |
| K2 | 2 | HOLD, WAIT 1 |
phase 3 ✓ | 0 |
| L7 | 0 | HOLD, WAIT 1 |
phase 1 ✓ | 2 |
Each transfer pushes the clock on by one phase, which is why every hop after the first needs a one-phase wait.
Console commands
AUTH 60AAA70740D0
DIAL C-481
HOLD
WAIT 1
TRANSFER M3
HOLD
WAIT 1
TRANSFER K2
HOLD
WAIT 1
TRANSFER L7
COMMIT
60AAA70740D0 is R2, recovered from Chapter 2 (Voices Through the Air).
The console accepted the commit with route M3@1>K2@3>L7@1. The recovered relay message reads:
COASTAL_SWITCH_CONFIRMED|NEXT=HANDOVER_TRACE|ARCHIVE=2002
Output:
COMMIT ACCEPTED — recovered archive replay
ROUTE=M3@1>K2@3>L7@1
RELAY=COASTAL_SWITCH_CONFIRMED|NEXT=HANDOVER_TRACE|ARCHIVE=2002
R3=8B303FABB0B6
FLAG{REDACTED}
Keep R3 for Chapter 4.
Vulnerability Analysis
Flag
`FLAG{REDACTED}
R3 = 8B303FABB0B6 — retain for Chapter 4.
Solver script
solve.py at the challenge root reproduces the solve programmatically:
- Parses
call_records.csv,exchange_audit.csv, andtrunk_inventory.csv. - Selects C-481 (CR-MVT / COAST-RELAY, LM-08, RECOVERABLE, origin MSA).
- Pairs TX with RX entries that agree on every field, rejecting forged/incomplete entries (T8, M9, E2).
- Walks verified hops from MSA to LAM, computing the
HOLD/WAITdeltas needed to align the four-phase clock with each trunk’s service phase. - Drives
exchange_console.pyvia stdin (AUTH→DIAL→ hops →COMMIT→QUIT) and prints the route, R3, and flag.
Run:
python3 solve.py
Notes
- The protocol, exchange, switches, call records, receipts, and CR-MVT service are fictional competition material, not a real telephony recording.
- Source inspection of
exchange_console.pyis permitted by the challenge rules; the commit is gated by an archive route seal (sha256("LS03|{R2}|{circuit}|{route}")[:20]) and the sealed-relay decryption insealed_relay.bin, so the route must be genuinely authenticated — random guessing cannot commit. - The same
R2and route string seed a SHA-256 counter-mode keystream that XORssealed_relay.bininto plaintext, and the plaintext must begin withCOASTAL_SWITCH_CONFIRMED|. A wrong circuit, route orR2yields a different keystream, so there is no shortcut around reconstructing the route. R3is the first 12 hex characters ofsha256("LS03|R2|CSX-02-FRAGMENT-17|route|plaintext").- The 2002 Kenyan telecommunications context is sourced from the Communications Authority of Kenya; the challenge itself tests technical reconstruction, not date/trivia recall.

